English
Español1. Challenges of mowing work brought by complex terrain
With the acceleration of urbanization, the area of urban green space continues to expand, and the landscape design pays more attention to nature and personalization. This makes the lawn no longer limited to a flat plane, but incorporates a lot of ups and downs, slopes and irregular shapes. In large urban parks, in order to create a landscape atmosphere close to nature, rolling hills and winding streams are often created, and the terrain of the surrounding lawns is complex and changeable. In order to increase the fun and challenge of the sport, the golf course not only has different degrees of ups and downs, but also has steep slope protection and special terrain around the sand pit.
Traditional lawn mowers expose many problems when facing these complex terrains. On undulating terrain, due to the tilt of the fuselage, the distance between the blade and the lawn is difficult to maintain a constant, resulting in some lawns being cut too short and some too long. On steep slopes, traditional lawn mowers are difficult to drive stably, posing serious safety hazards. According to statistics, when using traditional lawn mowers to maintain golf courses with complex terrain, the rate of unqualified lawn mowing quality due to terrain factors is as high as 30%. In narrow corners and areas with many obstacles, traditional lawn mowers are inconvenient to operate and often require manual mowing, which consumes a lot of time and labor costs. Taking small green spaces on urban streets as an example, due to the restrictions of surrounding buildings and trees, it is difficult to use lawn mowers, and manual mowing accounts for more than 40% of the entire mowing work time.
2. Design advantages of high-pass large-size tires
The high-pass large-size tires of high-quality Gas Brush Cutters Suppliers are ingenious in design and have significant advantages over ordinary lawn mower tires. These tires are significantly larger in size, and the increase in diameter and width greatly increases the contact area between the tire and the ground. According to the principles of physics, the larger the contact area, the smaller the pressure per unit area. On soft ground, ordinary lawn mower tires are easy to sink into the soil due to their small contact area and high pressure per unit area. The large-size tires of high-quality Gas Brush Cutters Suppliers effectively disperse the weight of the machine and reduce the pressure per unit area by increasing the contact area, thereby greatly improving the ability to pass on soft ground.
In the newly laid lawn area of parks or golf courses, the soil is relatively soft, and ordinary lawn mower tires are very easy to get stuck in it, causing the machine to be unable to drive normally, and even require external assistance to get out of trouble. High-quality Gas Brush Cutters Suppliers equipped with large-size tires with high passability can easily drive on such soft lawns without getting stuck. This not only improves mowing efficiency, but also avoids damage to the newly laid lawn. For example, in the maintenance of a large area of newly laid lawn in a park, when using traditional lawn mowers, the downtime is as long as 15 minutes per hour due to the problem of getting stuck, and the potholes in the lawn caused by the stuck car need to be repaired manually later, which consumes a lot of manpower and material resources. After using high-quality Gas Brush Cutters Suppliers equipped with large-size tires with high passability, not only the mowing process is smooth, but also the newly laid lawn remains intact, without the need for additional repair work, which greatly improves maintenance efficiency.
3. Application effect of high-pass large-size tires in different scenarios
(I) Park green space maintenance
In the maintenance of park green space, the advantages of high-pass large-size tires are fully reflected. The lawn terrain in the park is diverse. In addition to the soft areas of newly laid lawns, there are also undulating terrains such as hills and depressions. High-quality Gas Brush Cutters Suppliers can easily traverse these complex terrains with the high passability of large-size tires. Around the hills, ordinary lawn mowers have poor tire passability and difficulty climbing, and are prone to tire slippage during the climbing process, causing the fuselage to be unstable. High-quality Gas Brush Cutters Suppliers equipped with high-pass large-size tires can climb hills stably while maintaining a suitable distance between the blade and the lawn to ensure uniform mowing height. According to statistics from a park management department, the mowing efficiency of park green spaces has increased by more than 40% after using high-quality Gas Brush Cutters Suppliers equipped with high-pass large-size tires. The mowing work that used to take a week to complete can now be completed with high quality in just four days, greatly improving the park's landscape maintenance level.
(II) Golf course lawn maintenance
Golf courses have extremely high requirements for the flatness and mowing quality of lawns. The fairways in the golf course are undulating and the slopes are steep, which puts great pressure on the performance of lawn mowers. High-passage large-size tires play a key role in golf course lawn maintenance. On undulating fairways, large-size tires can better adapt to terrain changes and keep the lawn mower stable. On steep slopes, their good grip and passability ensure that the lawn mower can operate safely. After a well-known golf course replaced the high-quality gasoline lawn mower equipped with high-passage large-size tires, the flatness of the lawn was significantly improved. Players reported that the ball rolled more smoothly on the fairway, and the competitiveness and professionalism of the golf course were further improved. According to the golf course manager, after using the new lawn mower, the flatness error of the lawn was controlled within a very small range, which effectively improved the quality of the golf course.
(III) Private manor and villa courtyard lawn maintenance
The lawns of private manors and villa courtyards often have unique designs and complex terrains, such as irregular boundaries and rockery surroundings. The high-passability and large-size tires of high-quality Gas Brush Cutters Suppliers enable them to easily cope with these complex environments. In narrow corners, large-size tires can flexibly turn to avoid collisions with surrounding landscape facilities. In complex terrain areas such as around rockery, ordinary lawn mowers are difficult to reach due to poor tire passability, and can only rely on manual mowing, which consumes a lot of manpower and time. High-quality Gas Brush Cutters Suppliers equipped with high-passability and large-size tires can smoothly enter these areas and complete mowing work efficiently. An owner of a private manor said that after using high-quality Gas Brush Cutters Suppliers equipped with high-passability and large-size tires, not only a lot of mowing time is saved, but also the lawn mowing effect is more in line with expectations, which improves the overall beauty of the manor.
IV. Market Trends and Future Prospects
With the continuous improvement of people's requirements for the quality of living environment and the continuous development of urban greening and garden landscape industries, the market demand for high-quality mowing equipment is showing a rapid growth trend. Especially in the maintenance of complex terrain lawns, the market share of high-quality Gas Brush Cutters Suppliers equipped with high-passability and large-size tires continues to expand. According to market research institutions, in the past few years, the share of such mowers in the complex terrain mowing equipment market has increased year by year, and its market share is expected to grow by 30% - 40% in the next five years.
Looking ahead, large-size tires with high passability will continue to innovate and optimize. In terms of materials, new high-strength, lightweight and wear-resistant materials may be used to further improve the performance of tires. This material can not only reduce the weight of the tire itself and reduce fuel consumption, but also increase the service life of the tire and reduce the frequency of replacement. In terms of design, more intelligent elements may be introduced. For example, by installing sensors, the tire's air pressure, temperature, and ground conditions can be monitored in real time, and the tire's inflation state and pattern expansion degree can be automatically adjusted according to this information to adapt to different terrains and working conditions, further improving the tire's passability and stability.
In addition, with the increase in environmental awareness, the environmental performance of tires will also become a research and development focus. In the future, more environmentally friendly tire materials may be developed to reduce environmental pollution during tire production and use. At the same time, by optimizing the design of tires, reducing tire rolling resistance and fuel consumption, exhaust emissions can be reduced, contributing to environmental protection.
